Forth Road Bridge to have worn-out joints replaced in year-long work

The Forth Road Bridge will be under maintenance for a year. Picture: Lisa Ferguson/JP
The Forth Road Bridge will be under maintenance for a year. Picture: Lisa Ferguson/JP
Have your say

WORN-out joints on the Forth Road Bridge are to be replaced in a year-long programme costing £5.9m.

Work to replace the main expansion joints will begin on Monday, November 12 - without any diversions or expected delays to motorists.

Mark Arndt, Amey’s account director for the Forth Bridges Unit, said: “The main expansion joints have exceeded their design life and are overdue for replacement, however we’ve been monitoring them closely over the years to ensure the continuing safety of bridge users and we’re now ready to replace them without any disruption to traffic.”

READ MORE: Rental car sat nav sends German tourist over Forth Road Bridge

The Forth Road Bridge’s main expansion joints were originally scheduled to be replaced in 2009, in what would have been by far the most disruptive maintenance project in the bridge’s history, despite plans to maximise traffic flow by building temporary overbridges across the joints.

HGVs would have had to divert to Kincardine for the duration of the works, and traffic on the bridge would have been reduced to a single lane in each direction while the overbridges were constructed and dismantled.

In December 2008, the Forth Estuary Transport Authority postponed the works when the Scottish Government confirmed its timetable for construction of the Queensferry Crossing.

Failsafe devices were installed for safety, along with improved maintenance access to allow monitoring and inspection to be implemented until the joints could eventually be replaced.

The works will now cost £5.9 million – less than half the £13.7 million cost when the works were originally tendered in 2008.

This saving is largely attributable to the Queensferry Crossing being available to carry traffic, meaning expensive overbridging works are no longer required.

Mr Arndt said: “The Queensferry Crossing has already delivered a major benefit by sparing the public the immense disruption that would have been caused if these works had gone ahead in 2009. It will also allow us to deliver these works at a significantly reduced cost, and avoid the economic impact of an extended closure to HGVs such as we saw during the emergency repairs of winter 2015/16, when the Road Haulage Association estimated the cost to the industry at over £600,000 per day.

“The new joints have been manufactured in Ayrshire and Sheffield, using a similar overall design to the originals, but with improved materials and enhanced details. The team has been planning and preparing for this project for a number of years and we’re looking forward to starting work on site.”

READ MORE: Double vision: Grandad buys 10ft Forth Bridge artwork despite having exact same view

Work will begin on joints on the east footpath, which will be closed to the public from November 12 until late January 2019, with pedestrians and cyclists directed to the west footpath instead.

Work on the much larger joints in the main carriageways is expected to begin in late January. Traffic on the bridge will be restricted to a single lane in each direction for most of 2019 while work on the carriageways is in progress. Joints in the west footpath will be replaced once work on the carriageways is complete.

Journey times for vehicles using the Forth Road Bridge will not be affected by these works, and no diversions will be required.

Contractor American Bridge International has been appointed to carry out the works, with Forth Bridges operating company Amey managing and supervising the project on behalf of Transport Scotland.

Join our Facebook group Our Edinburgh to share images and news from and around the Capital